Hardware Installation; Physical Installation - Planet Networking & Communication ICA-5260V User Manual

I/O PIN definition
GND (Ground): Initial state is LOW
DO (Digital Output): 5V DC
DI (Digital Input): Max. 50mA, 5V DC
2

.3 Hardware Installation

2.3.1 Physical Installation

1. Connector Instruction
Remove the dome cover and you will see the structure as shown below.
Connect power adapter first, then connect the IP Camera to PC or network, and set up
the network configurations according to the network environment. The following picture
shows a 12V DC connector for adapter jack plug.
60fps Full HD Vandalproof IR IP camera
14
ICA-5260V