To recover the default IP address and password, please follow the following steps:
Remove the power and Ethernet cable. Press and hold the button as the picture is shown
below.
•Connect power to the camera again, and do not release the button during the system
booting.
• It will take around 60 seconds to boot the camera.
• Release the button when the camera finishes proceeding.
• Re-login the camera using the default IP (http://192.168.0.20) where both user
name and password are admin.
60fps Full HD Vandalproof IR IP camera
Appendix A: Factory Default
65
ICA-5260V