Table of Contents
Advertisement
Based on the
Schedule
GPIO Output Setting
On Off Switch
Time Switch
5.4.4 Log List
Sort by System Logs, Motion Detection Logs and I/O Logs. In addition, System Logs and I/O Logs
won't lose data due to power failure.
When the option box is checked, only during the selected
scheduled time, the I/O is enabled. For example, the 11th hour
of Monday has not been colored in the scheduled table, then no
action will be triggered even the camera detects input signal
during 11:00~12:00 on Monday.
The GPIO I/O port output activates On/Off Switch, Slide Switch
or Pan/Tilt Module for use with relay box.
The camera triggers the external device and lasts for 10
seconds. You can turn off the alarm manually by clicking "off" on
the right bottom of the live video page.
The camera triggers the external device and lasts for certain of
time according to the interval setting, and the user is not allowed
to break off the alarm manually.
61
60fps Full HD Vandalproof IR IP camera
ICA-5260V
Advertisement
Table of Contents
