Hardware Installation - Planet Networking & Communication ICA-HM100 User Manual

2.3 Hardware Installation

Step 1. Attach the Camera with the included stand
Step 2. Place the Camera on the table or fix it onto ceiling or wall
Use three screws to fix the IP Camera onto the ceiling or wall. You could also put the IP
Camera on the table directly.
Step 3. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the IP Camera's bottom and
attach it to the network.
Ethernet Cable
Step 4. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the IP Camera. Note: Use the
power adapter, 12VDC, included in the package and connect it to wall outlet for AC power.
Once you have installed the IP Camera well and powered it on, the network accessing type
LED will turn on. It means the system is booting up successfully. Furthermore, if you have a
7
Fixed it by
Screws
Power Cable