DO NOT CONNECT POWERED CABLE to DI/DO! This will damage the
WARNING
device permanently!
Connector
LAN
Antenna Base
SD/ SDHC Card Slot
2.3 Hardware Installation
Please follow the following instructions to setup your new IP camera.
If you wish to place this IP camera on the table, please skip step 1 to 5.
NOTE
1.Secure the wall mounting metal plate A on the wall, secure it by 4 screws at the screw holes
indicated by black arrows. You can secure it upside-down when required.
User's Manual of ICA‐HM227W
the button of the PIN you wish to insert
or release.
Function
Connect to your local area network by Ethernet cable.
Allows device connects to the supplied antenna.
Inserts SD card for video recording. Maximum 32GB** of SDHC card
supported.
DO
DI1
DI2
13
Digital Output #1
Digital Input #1
Digital Input #2(Left)