Pppoe - Planet Networking & Communication ICA-5260V User Manual

Double-click "My Network
screen and double-click the UPnP icon with Internet camera to view your device in an Internet
browser.

5.2.4 PPPoE

PPPoE: Stands for Point to Point Protocol over Ethernet.
A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet camera to
connect to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP
address. For more PPPoE and Internet configuration, please consult your ISP.
It can dire ctly connect to the xDSL; however, it should be set up in a LAN environment to program
th e PPPoE information first, and then connect to the xDSL modem. Power on again to enable the
device to dial on to the ISP connection to the WAN through the xDSL modem.
The procedures are:
(1) Select "Enabled" to use PPPoE.
(2) Key-in username and password for the ADSL connection.
(3) Send mail after dialing：When connecting to the Internet, it will send a mail to a specific mail
.account. For the mail setting, please refer to "Mail and FTP" settings.
Places"on the desktop. The "My Network Places" will display on the
47
60fps Full HD Vandalproof IR IP camera
ICA-5260V