Hardware Installation; Physical Installation Of Ica-601 - Planet Networking & Communication ICA-601 User Manual

2.3 Hardware Installation

2.3.1 Physical Installation of ICA-601

1. During the installation, please take care and avoid crash. That
Note
may cause the device damage.
2. Please make sure the hardware had been located on the cell or
roof properly. If the hardware drops down, it is possible make
someone hurt. Please check the hardware again after the
installation.
1. Cut a 218~220mm diameter hole on false ceiling (according to speed dome outer cover). The
ceiling needs to embed the 115mm depth speed dome IP cam body.
10