Page 3
Do not dispose of WEEE as unsorted municipal waste; they should be collected separately. Revision User’s Manual of 60fps Full HD Vandalproof IR IP Camera Model: ICA-5260V Rev: 1.00 (July, 2014) Part No. EM-ICA-5260V...
Chapter 2 Basic Setup..................12 2.1 System Requirements .................12 2.2 Physical Description................13 2.2.1 Identification of ICA-5260V Cable..........13 2.2.2 ICA-5260V I/O Control Instruction ..........13 2.3 Hardware Installation................14 2.3.1 Physical Installation ..............14 2.4 Initial Utility Installation...............18 2.4.1 Searching and Configuring Network by PLANET IP Installer 18 2.5 Setting up ActiveX to use the Internet Camera .........21...
Page 5
60fps Full HD Vandalproof IR IP camera ICA-5260V Appendix F: Troubleshooting & Frequently Asked Questions....... 72 Appendix G: Micro SD Card Compatibility ............76...
Day & Night Functionality To adapt to constantly changing lighting conditions during the day and night, the ICA-5260V comes with a removable IR-cut filter and built-in low IR illuminators(0.01 lux), which enable the camera to provide color video when there is sufficient light, and show color video in dark conditions(IR LED off).
Page 7
Advanced Event Management The ICA-5260V also support a number of advanced features that give the camera increased flexibility and capabilities, including auto-iris for improving the image quality to avoid over exposure, AV out for performing the two-way audio function and inputs/outputs for connecting external devices such as door sensors and relays to activate light or close doors.
Page 8
ICA-5260V Flexible Installation and Power Functionality The ICA-5260V incorporate Power over Ethernet which supplies power to the camera via the network, eliminating the need for power cables and reducing installation costs. The ICA-5260V are ONVIF-compliant and therefore interoperable with other manufacturer’s products. It also includes 64-CH central management software.
60fps Full HD Vandalproof IR IP camera ICA-5260V 1.1 Features Camera 1/2.8” 2.4 mega-pixel progressive Sony Exmor CMOS sensor 3~9 mm vari-focal, DC auto-iris lens Super low lux@0.01 Maximum resolution 1920 x 1080 at 60fps True WDR Enhancement to enhance visibility under extremely bright or dark environments Removable IR-cut Filter for Day &...
60fps Full HD Vandalproof IR IP camera ICA-5260V Cam Viewer 3 central management softwar e supported 1.2 Product Specifications Model ICA-5260V Camera Image Device 1/2.8” 2.4mega-pixel with Sony Exmor™ CMOS sensor Lens Vari-Focal 3~9 mm, DC Auto-Iris Mechanical IR-cut filter...
60fps Full HD Vandalproof IR IP camera ICA-5260V Application Programming Open API for software integration Interface Alarm Triggers Intelligent video motion detection and external input 3-zone video motion detection Alarm Events File upload via FTP, email and SAMBA External output activation...
60fps Full HD Vandalproof IR IP camera ICA-5260V Chapter 2 Basic Setup This chapter provides details of installing and configuring the Internet camera 2.1 System Requireme Network Interface 10/100Base-TX Ethernet Monitoring System Recommended for Internet Explorer 8.0 or later · CPU: Intel Core i3-530 System Hardware ·...
60fps Full HD Vandalproof IR IP camera ICA-5260V 2.2 Physical Description 2.2.1 Identification of ICA-5260V Cable 1. RJ -45 LAN socket: Co ect to PC or Hub/Switch. For conn ection to 10B ase-T Ethernet or 100Base-TX Fast Ethern et cabling, this Ethernet port built...
60fps Full HD Vandalproof IR IP camera ICA-5260V I/O PIN definition GND (Ground): Initial state is LOW DO (Digital Output): 5V DC DI (Digital Input): Max. 50mA, 5V DC .3 Hardware Installation 2.3.1 Physical Installation 1. Connector Instruction Remove the dome cover and you will see the structure as shown below.
Page 15
60fps Full HD Vandalproof IR IP camera ICA-5260V In order to ensure IP66 waterproof level, please install the vandal dome according to the instruc tions. a. The unused cable outlet hole must be closed, and the waterproof connector on the used hole must be locked closely.
Page 16
60fps Full HD Vandalproof IR IP camera ICA-5260V e. Use the 3-axis bracket to adjust the camera to an appropriate angle. f. B efore you clos e the dome cover, make sure that the black rubber band sticks to the inside of the cover completely.
Page 17
60fps Full HD Vandalproof IR IP camera ICA-5260V When you connect cables to machine, we advise to use a hose to include all the cables inside instead of plugging in several cables separately, because water may seep down the gap of cables into machine. You can also seal the connector hole with silicone after installation.
60fps Full HD Vandalproof IR IP camera ICA-5260V 2.4 Initial Utility Installation This chapter shows how to quickly set up your H.264 camera. The camera is with the default settings. However, to help you find the networked camera quickly the windows utility PLANET IP Installer can...
Page 19
60fps Full HD Vandalproof IR IP camera ICA-5260V 3. The GUI of IP Installer is as follows (Default IP: 192.168.0.20). (1) IP Installer will search all IP Cameras connected on LAN. The user can click “Search Device” to search again.
Page 20
60fps Full HD Vandalproof IR IP camera ICA-5260V (3) Please make sure the subnet of PC IP address and IP CAM IP address are the same. IP CAM IP address: 192.168.0.20 PC IP address: 192.168.0.100 (4) Different Subnets: IP CAM IP address: 192.168.0.20 PC IP address: 192.168.1.100...
60fps Full HD Vandalproof IR IP camera ICA-5260V If the user name and password are input correctl y, the following web page will be displayed. .5 Setting up ActiveX to use the Internet Camera The Internet came ra we b pages communicate with the Internet camera using an ActiveX control.
60fps Full HD Vandalproof IR IP camera ICA-5260V Set up the first 3 items • Download the signed ActiveX controls • Download the unsigned ActiveX controls • Initialize and script the ActiveX controls not masked as safe to Prompt By now, you have finished your entire PC configuration for Internet camera.
60fps Full HD Vandalproof IR IP camera ICA-5260V By now, you have finished your entire PC configuration for Internet camera. 2.5.3 Internet Explorer 7 for Windows Vista From your IE browser ”Tools” ”Internet Options…” ”Security” ”Internet” ”Custom Level…”, please set up your “Settings” as follows: •...
Page 24
60fps Full HD Vandalproof IR IP camera ICA-5260V • Prompt “Initialize and script active controls not marked….” y now, you have finished your entire PC configuration for Internet camera.
60fps Full HD Vandalproof IR IP camera ICA-5260V Chapter 3 Web-based Management This chapter provides setup details of the Internet camera’s Web-based Interface. 3.1 Introduction The Internet camera can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with Internet camera.
Page 26
60fps Full HD Vandalproof IR IP camera ICA-5260V After the ActiveX control is installed and run, the first image will be displayed. 1. If you log in the camera as an ordinary user, setting function will not be available. If you log in the camera as the administrator, you can perform all the...
60fps Full HD Vandalproof IR IP camera ICA-5260V Chapter 4 Live Viewing Start-up screen will be shown below whether you are an ordinary user or an administrator. Get into the administration page. (1) Configure .Video Snapshot (2) Snapshot (3) Status Bar Show system time, video resolution, and video refreshing rate.
Page 28
60fps Full HD Vandalproof IR IP camera ICA-5260V Double-click the video; it will change to full screen mode. Press “Esc” or double-click the video again. It will change back to normal mode. Right-click the mouse on the video, it will show a pop-up menu.
60fps Full HD Vandalproof IR IP camera ICA-5260V Chapter 5 Configuration Click to get into the administration page. Click to go back to the live video page. Syste 5.1.1 System Information 1. Se rver Information: S et up th e camera name, sel ect language, and set up the camera time.
Page 30
60fps Full HD Vandalproof IR IP camera ICA-5260V There are English, Traditional Chinese, Simplified Chinese, French, Russian, Italian, Spanish, German, Portuguese, Polish Select language and Japanese to select. When changed, it will show the following dialogue box for the confirmation of changing language.
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.1.2 User Management IP camera sup ports three different users -- administrator, gen eral user, and anonymous user. Yes:Allow anonymous login Anonymous User Login No:Need user name & password to access this IP camera...
60fps Full HD Vandalproof IR IP camera ICA-5260V Type the user name and password, then click “Add/Set”. Add user 5.1.3 System Update To update the firmware online, click “Browse…” to select the Firmware Upgrade firmware. Then click “Upgrade” to proceed.
60fps Full HD Vandalproof IR IP camera ICA-5260V setting in PC Select saving directory Save Upgra de from pre vious setting: Brows search previous setting open upgrade Setting update confirm click index.html o return to main page 5.2 Network 5.2.1 IP Setting...
Page 34
60fps Full HD Vandalproof IR IP camera ICA-5260V Using DHCP, IP camera will get all the network parameters DHCP automatically. Please type in IP address, subnet mask, gateway, and DNS Static IP manually. IPv6 is a newer numbering system that provides a much larger address pool than IPv4, which accounts for most of today’s...
Page 35
60fps Full HD Vandalproof IR IP camera ICA-5260V When the camera is installed under a router, Enable UPnP ort Forwar ding to let the router open ports so that the video UPnP Port reams ca n be sent out from a LAN. Set Web Port, Http Port,...
60fps Full HD Vandalproof IR IP camera ICA-5260V Call out the Control Panel → Network and Internet → Network and Sharing Center → Click "See full map" 5.2.2 Advanced 5.2.2 .1 Https (Hyp ertext Tra nsfer Protocol Secure) Https can help protect stre amin g data transmission over the internet on the higher security level.
Page 37
60fps Full HD Vandalproof IR IP camera ICA-5260V There are two ways to set Certificate -- Install Signed Certificate or Create Self-Signed Certificate. 5.2.2.2 SNMP (Simple Network Management Protocol) SNMP provides a simple framework for administering networked hardware. To manage the IP camera, you have to prepare an MIB browser or similar tools first.
Page 38
60fps Full HD Vandalproof IR IP camera ICA-5260V For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only the security name (the same as "community name" in v1 and v2c, or sometimes we call it "context name") but the password in order to access the IP camera.
Page 39
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.2.2.3 Access List You can deny an IP address or a range of IP address so that they cannot access the IP camera. ick the "enable" box, key-in the IP address you want to deny, select” deny" and then click” Add" to add it to the list.
Page 40
60fps Full HD Vandalproof IR IP camera ICA-5260V DSCP specifies a sim ple mechanism for classifying and managing network traffic and provides QoS on IP networks. DSCP is a 6-bit in the IP header for packet classification purpose. The number 0~63 for Live Stream, Event / Alarm, and Management represent the ratio that the bandwidth is divided.
60fps Full HD Vandalproof IR IP camera ICA-5260V support service identification and optional point to point encryption over the local LAN segment. lease check what version of the authenticator and authentication server support. This camera supports EAP-TLS method. Please enter ID and password issued by the CA and then upload related certificates.
Page 42
60fps Full HD Vandalproof IR IP camera ICA-5260V The “Control Panel” will display on the screen and double-click “Add or Remove Programs” to ontinue The “Add or Remove Programs” will display on the screen and click Add/Remove Widows Components to continue.
Page 43
60fps Full HD Vandalproof IR IP camera ICA-5260V The following screen will appear. Select “Networking Services” and click “Details” to continue The “Networking Services” will display on the screen. Select “Universal Plug and Play” and click “OK” to continue.
Page 44
60fps Full HD Vandalproof IR IP camera ICA-5260V Please click “Next” to continue. The program will start installing the UPnP automatically. You will see the pop-up screen below. Please wait while Setup configures the components.
Page 45
60fps Full HD Vandalproof IR IP camera ICA-5260V Please click “Finish” to complete the UPnP installation. Double-click “My Network Places” on the desktop. The “My Network Places” will display on the screen and double-click the UPnP icon with Internet camera to view your device in an Internet...
Page 46
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.2.3.2 Windows Vista UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled device. If the operating system, Windows Vista, of your PC is UPnP enabled, the device will be very easy to configure.
60fps Full HD Vandalproof IR IP camera ICA-5260V Double-click “My Network Places“on the desktop. The “My Network Places” will display on the screen and double-click the UPnP icon with Internet camera to view your device in an Internet browser. 5.2.4 PPPoE PPPoE: Stands for Point to Point Protocol over Ethernet.
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.2.5 DDNS DDNS: Stands for Dynamic Domain Name Server The device supports DDNS If your device is connected to xDSL directly; you might need this feature. However, if your device is behind a NAT router, you will not need to enable this feature. Because DDNS allows the device to use an easier way to remember naming format rather than an IP address.
60fps Full HD Vandalproof IR IP camera ICA-5260V DDNS Status (1) Updating:Information update (2) Idle:Stop service (3) DDNS registration successful, can now log by http://<username>.ddns.camddns.com : Register successfully. (4) Update Failed, the name is already registered:The user name has already been used. Please change it.
Page 50
60fps Full HD Vandalproof IR IP camera ICA-5260V Mail setting FTP setting...
For the security purpose, there are three areas that can be set up for privacy mask. Click “Area” button first and pull an area on the above image. Finally, click “Save” button to reserve the setting. Adjust “Brightness”, “Contrast”, “Hue”, and “Saturation” to get clear video. Moreover, the ICA-5260V also supports “Night Mode” and “Video Orientation”.
Page 52
60fps Full HD Vandalproof IR IP camera ICA-5260V Brightness, Contrast, Hue, Saturation, and Sharpness can be (1) Image adjust adjusted here. Automatic gain control. The sensitivity of camera can be adjusted with the environmental light. Enable this function and (2) AGC the brighter image can be got under dim light, but the level of noise may also increase.
60fps Full HD Vandalproof IR IP camera ICA-5260V The camera can detect the light level of environment. If you choose "Light Sensor Mode", the image will be turned to black and white at night in order to keep clear. To set to light sensor (8) Day &...
Page 54
60fps Full HD Vandalproof IR IP camera ICA-5260V 1. Max. Video Fram e Rate for streaming 1 is 60fps, streaming 2 only provides 30 FPS. 2. When cha nged to D-WDR, streaming 2 will disable. 5.3.2.1 Video System: Click the drop-down list to select the system type “NTSC...
Page 55
60fps Full HD Vandalproof IR IP camera ICA-5260V The video refreshing rate per second. The maximum Video Frame Rate value is affected by the input resolution you choose. Video Format H.264 or JPEG. RTSP Path Set the RTSP output connecting route.
2-way audio. User can send audio from ICA-5260V’s external microphone to remote PC; user can also send audio from remote PC to ICA-5260V’s external speaker. (1) Audio from IP camera’s exte rnal microphone to loca l PC: select “Enabled” to start this function.
60fps Full HD Vandalproof IR IP camera ICA-5260V (2) Audio from local PC to ICA-5260V: Check “chatting” on the browsing page. The audio will not be smooth when the SD card is recording. 5.4 Event List The ICA-5260V provides multiple event settings.
Page 58
60fps Full HD Vandalproof IR IP camera ICA-5260V IP camera allows 3-area motion detection. When motion is triggered, it can send the video to some specific mail addresses, transmit the Motion Detection video to remote ftp server and SAMBA, and trigger the relay. To set up the motion area, click “Area Setting”...
60fps Full HD Vandalproof IR IP camera ICA-5260V Pre Alarm and Post Alarm setups for video start and end time when motion detects I/O, or other devices got triggered. Note: Pre/Post Alarm record time is based on record time setting and Record Time Setting IP cam built-in RAM memory.
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.4.3 I/O Setting The I CA-5260V supports 1 input/1 output. When input is triggered, it can send the video to some specific mail addresses, transmit th e video to remote ftp server, and trigger the relay and SAMBA.
60fps Full HD Vandalproof IR IP camera ICA-5260V When the option box is checked, only during the selected scheduled time, the I/O is enabled. For example, the 11th hour Based on the of Monday has not been colored in the scheduled table, then no...
60fps Full HD Vandalproof IR IP camera ICA-5260V 5.4.5 SD Card 5.4.5.1 Playback Please insert a micro SD card before using it. Make sure t o push t h e micro SD card into the slot completely. Click the date listed on this page and it shows the list of the video. The video format is AVI. Click the video to start Microsoft Media Player to play i To delete the video, check it and then click "Del".
Page 63
60fps Full HD Vandalproof IR IP camera ICA-5260V o’clock now. Choose “The 1st day”. The files will be kept from five o’clock yesterday to five o’clock today. The oldest file will be deleted if the micro SD card is full.
Page 64
60fps Full HD Vandalproof IR IP camera ICA-5260V FlashGet will show you the link list, and you can tick the files you want to copy to your PC. Give the directory p ath in the new download window, and remember to enable "Login to Server": key-in th...
60fps Full HD Vandalproof IR IP camera ICA-5260V Appendix A: Factory Default To recover the default IP address and password, please follow the following steps: Remove the power and Ethernet cable. Press and hold the button as the picture is shown below.
60fps Full HD Vandalproof IR IP camera ICA-5260V ppendix B: Ping IP Address The Ping (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply.
60fps Full HD Vandalproof IR IP camera ICA-5260V Appendix C: 3GPP Access To use the 3GPP function, in addition to the previous section, you might need more information or configuration to make this function works. 1. To use the 3GPP function, it is strongly recommended to install the Networked Device with a public and fixed IP address without any firewall protection.
Configuring PLANET DDNS steps: Step 1 En able DDNS option through accessing web page of the ICA-5260V. Step 2 Select on DDNS se rver provided, and register an account if you do not use yet. Let’s take dyndns.org as an example. Register an account at...
60fps Full HD Vandalproof IR IP camera ICA-5260V endix E: Configuring Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP ddress needs to be set up as a fixed IP address. T he port forwarding or Virtual Server function of router also needs to be set up.
Page 70
60fps Full HD Vandalproof IR IP camera ICA-5260V Your WAN IP address will be listed here. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet.
Page 71
60fps Full HD Vandalproof IR IP camera ICA-5260V Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be accessed from WAN by the router’s WAN IP address.
Page 72
60fps Full HD Vandalproof IR IP camera ICA-5260V Appendix F: Troubleshooting & Frequently Asked Questions Features The device utilizes H.264 and M-JPEG compressions to provide high-quality images where H.264 is standards for video compression The video and audio codec is and M-JPEG is a standard for image compression.
Page 73
60fps Full HD Vandalproof IR IP camera ICA-5260V Check the firewall setting of your PC or Notebook. Make sure that your Internet Explorer is version 8.0 or later. If yo Internet Explorer does not seem to are experiencing problems , try upgrading to the latest version o work well with the device Microsoft’s Internet Explorer...
Page 74
60fps Full HD Vandalproof IR IP camera ICA-5260V Camera on the same LAN. Access with the private IP address and correct port number of Network Camera. When you use DDNS, you need to set Default Gateway and DNS server address.
Page 75
60fps Full HD Vandalproof IR IP camera ICA-5260V Your connection to the device does not have enough bandwidth to support a higher frame rate for the streamed image size. Try reducing the video streaming size to 160x120 or 320x240 and/or Blank screen or very slow video disabling audio.
Page 76
60fps Full HD Vandalproof IR IP camera ICA-5260V Appendi x G: Micro SD Card Compatibility The following is the M icro SD Card recom mended: Transcend SDHC class4 16GB class4 32GB class4 16GB class4 32GB SDHC class6 SDHC class6 class6...