Advertisement
VERIFY THE CONTENTS INSIDE THE BOX
The package should contain the following items plus Full HD Outdoor IR Wireless IP Camera. If any item
is missing or damaged, please contact the seller immediately
Quick Installation Guide x 1
Screw Package x 1
Female to Female RJ45 Connector x 1
Step 1: Hardware Overview
Interface
I/O
Input Power
Audio Out (Green)
Audio in (Pink)
Ethernet RJ45
TV Video Out
User's Manual CD-ROM x 1
Rubber Cover x 1
I/O terminal connector is used for such functions as motion detection, event
triggering, and alarm alert. It provides the interface to I/O terminal.
1) GND (Ground): Initial status is LOW
2) DI (Digital Input): Max. 50mA, 5V DC
3) DO (Digital Output): 5V DC
12V DC.
Connect a loud speaker to the network camera. This is for voice alert and
two-way audio.
Connect a microphone to the network camera.
Connect to PC or hub/switch.
For connecting to 10BASE-T Ethernet or 100BASE-TX Fast Ethernet
cable, this Ethernet port built N-Way protocol can detect or negotiate the
transmission speed of the network automatically. Please use CAT-5 cable to
connect the Network Camera to a 100Mbps Fast Ethernet network switch or
hub.
Connect BNC connector to a TV.
Power Adapter x 1
Antenna x 1
I / O
DC 12V
AUDIO OUT (Green)
AUDIO IN (Pink)
ETHERNET RJ45
TV VIDEO OUT
Description
Advertisement
