Heating Up The Oven For The First Time And Rinsing The Steam Injection System - Miele HR1954 Operating Instructions Manual

Before using for the first time
Heating up the oven for the
first time and rinsing the steam
injection system
New ovens can give off an unpleasant
odor on first use. Heating up the oven
for at least 1 hour with nothing in it will
get rid of this smell. It is a good idea to
rinse the steam injection system at the
same time.
Ensure that the kitchen is well
ventilated while the appliance is
being heated up for the first time.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
 Remove any protective wrapping and
sticky labels from the oven.
 Before heating the oven up, wipe the
interior with a damp cloth to remove
any dust or bits of packaging that
may have accumulated in the oven
cavity during storage and unpacking.
 Insert the FlexiClips with wire rack
(available to order) to the shelf
runners and insert all trays and the
rack.
 Turn on the oven.
The main menu will appear.
 Select
Operating Modes
 Select Moisture Plus .
The default temperature is displayed
(350 °F/160 °C).
The oven heating, lighting and cooling
fan will turn on.
 Set the highest possible temperature
(475 °F/250 °C).
38
.
 Confirm with OK.
 Select
Automatic burst of steam
After a short time, a burst of steam is
injected automatically.

Risk of injury!
Steam can cause scalding.
Do not open the door during a steam
burst.
Heat up the oven for at least an hour.
After at least one hour:
 Turn the oven off.
After heating up for the first time

Danger of burns! Allow the oven
to cool before cleaning.
 Turn on the oven.
 Select Light to turn on the oven light.
 Take all accessories out of the oven
and clean them by hand (see
"Cleaning and care").
 Clean the oven interior with warm
water and liquid dish soap, applied
with a soft sponge or cloth.
 Dry all surfaces with a soft cloth.
 Turn the lighting and the oven off.
Leave the oven door open until the
oven interior is completely dry.
.