Quick Start Guide - Billion BiPAC 8501 R3 Quick Start Manual

Quick Start Guide

Port
1 Power Switch
2 Power
3 Reset
Ethernet 1 ~ 4
4
DSL
5
The Rear Ports of BiPAC 8521 R3
Port
1 Power Switch
2 Power
3 Reset
Ethernet 1 ~ 4
4
DSL 1 ~ 2
5
Power ON / OFF switch.
Connect the supplied power adapter to this jack.
After the device is powered on, press it
default settings (this is used when you cannot login to the router, e.g. forgot the
password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps.
Note: Port #4 can be configured as a WAN Interface for Broadband connectivity.
Connect this port to the SHDSL.bis network with the RJ-11 telephone cable
provided.
5
Power ON / OFF switch.
Connect the supplied power adapter to this jack.
After the device is powered on, press it
default settings (this is used when you cannot login to the router, e.g. forgot the
password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps.
Note: Port #4 can be configured as a WAN Interface for Broadband connectivity.
Connect this port to the SHDSL.bis network with the RJ-11 telephone cable
provided.
Meaning
6 seconds or above: to restore to factory
3
4
Meaning
6 seconds or above: to restore to factory
2 1
6