Model Naming Conventions; Figure 8: Model Naming Conventions For The Twisted Pair 8100S Series Switches; Figure 9: Model Naming Conventions Of The Fiber Optic 8100S Series; Table 4: Model Naming Conventions For The Twisted Pair 8100L And 8100S Series Switches - Allied Telesis AT-8100S/24C Installation Manual

Chapter 1: Overview

Model Naming Conventions

28
The letters and numbers in the model names identify the hardware
features of the switches. The naming conventions for the twisted pair
8100S Series switches are identified in Figure 8.
Figure 8. Model Naming Conventions for the Twisted Pair 8100S Series
The conventions are defined in Table 4.
Table 4. Model Naming Conventions for the Twisted Pair 8100L and
Convention
1 This is the product name.
2 The letter "S" indicates that the model is stackable.
The letter "L" indicates that the model is not stackable.
(The non-stackable switches are not described in this
manual. For installation instructions, refer to the
Stand-alone Switch Installation Guide for 8100L and
8100S Series Switches.)
3 This is the number of 10/100Base-TX ports.
4 The letters "POE" indicate support for Power over
Ethernet.
The letter "C" in the AT-8100S/24C model name denotes that the unit,
which has just one power supply, is smaller and more compact than the
other models.
The model naming conventions for the fiber optic 8100S Series switches
are identified in Figure 9.
Figure 9. Model Naming Conventions of the Fiber Optic 8100S Series
Switches
8100S Series Switches
Definition