10/100/1000 Mbps Twisted Pair Ports; Sfp Slots; Stacking Ports - Allied Telesis AT-8100S/24C Installation Manual

10/100/1000
Mbps Twisted
Pair Ports

SFP Slots

Stacking Ports

 Port prioritization
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
 Two ports per switch
 10Base-T, 100Base-TX, and 1000Base-T compliant

IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

100 meters (328 feet) maximum operating distance

IEEE 802.3x flow control in 10/100Base-TX full-duplex operation

IEEE 802.3x backpressure in 10/100Base-TX half-duplex
operation
 IEEE 803.3z 1000Base-T flow control
 Support for jumbo frames up to 10KB
 RJ-45 connectors
Here are the basic features of the SFP slots:

Two slots per switch

Support 100Mbps 100Base-FX or 1000Mbps 1000Base-SX/LX
transceivers
Note
The SFP slots are paired with the 10/100/1000Base-TX twisted pair
ports on the switch to form combo ports. For information, refer to
"SFP Slots" on page 34.
Note
SFP transceivers must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Here are the basic features of the stacking ports on the 8100S Series
switches:

Two stacking ports

10Gbps total bandwidth
 High-definition Multimedia Interface (HDMI) connectors
Stack Installation Guide for 8100S Series Switches
19