Model Naming Conventions; Figure 11: Model Naming Conventions For The Twisted Pair 8100L And 8100S Series Switches; Figure 12: Model Naming Conventions Of The Fiber Optic 8100S Series Switches; Table 5: Model Naming Conventions For The Twisted Pair 8100L And 8100S Series Switches - Allied Telesis 8100L Series Installation Manual

Model Naming Conventions

The hardware features of the switches are represented by the letters and
numbers in the model names. The conventions for the twisted pair 8100L
and 8100S Series switches are identified in Figure 11.
Figure 11. Model Naming Conventions for the Twisted Pair 8100L and
The conventions are defined in Table 5.
Table 5. Model Naming Conventions for the Twisted Pair 8100L and
Convention
1 This is the product name.
2 The letter "S" indicates that the model is stackable.
The letter "L" indicates that the model is not stackable.
3 This is the number of 10/100Base-TX ports.
4 The letters "POE" indicate support for Power over
Ethernet.
The letter "C" in the AT-8100S/24C model name denotes that the unit,
which has just one power supply, has a smaller, more compact size than
the other 8100S Series switches.
The "-E" in the AT-8100L/8POE-E model name indicates that the switch
has an extended operating temperature range. For details, refer to
"Environmental Specifications" on page 108.
The model naming conventions for the fiber optic 8100S Series switches
are identified in Figure 12.
Figure 12. Model Naming Conventions of the Fiber Optic 8100S Series
Stand-alone Switch Installation Guide for 8100L and 8100S Series Switches
8100S Series Switches
8100S Series Switches
Definition
Switches
33