Buell P3 Service Manual page 192

HOME
a0162x6x
7
6
5
4
1. Frame
2. Locknut
3. Snubber
4. Bolt
5. Spacer
6. Front isolator
7. Standoff
Figure 3-3. Front Isolator Mount
10. See Figure 3-3. Loosen and remove front isolator mount
bolt, spacer, snubber and locknut.
11. For top end service loosen, but do not remove lower front
tie bar bolts at engine and frame.
12. For engine removal, loosen and remove lower front tie
bar from engine.
7627
Figure 3-4. Remove Top Rear Tie Bar
13. See Figure 3-4. Remove top rear tie bar at frame.
1
3 2
a0074x3x
2
1
1. Screw
2. Bracket (left front)
3. Bracket (right rear)
4. Bracket screws
5. Cover mounting screw
Figure 3-5. Air Cleaner Assembly
NOTE
Remove entire air cleaner and carburetor as an assembly.
14. See Figure 3-5. Remove screws (4) on both air cleaner
brackets (2,3).
4
4
3
5
2007 Buell P3: Engine 3-9