Buell P3 Service Manual page 151

HOME
REMOVAL
1. Raise front wheel off floor.
2. Detach front brake caliper from rotor. See
BRAKE CALIPER.
3. Remove front wheel. See
4. Remove front fender. See
5. See Figure 2-64. Loosen headlamp bracket screws.
6. See Figure 2-65. Loosen the large pinch screws on both
the upper and lower triple clamps.
7. See Figure 2-66. Remove front fork. Repeat procedure
for the other front fork.
2-46 2007 Buell P3: Chassis
2.11 FRONT
2.5 FRONT WHEEL.
2.23 FENDERS.
a0065aSx
Figure 2-64. Headlamp Bracket Screws
3765
Figure 2-65. Upper and Lower Triple Clamp Pinch Screws
3766
Figure 2-66. Front Fork Removal