Kranzle therm 895 Operating Instructions Manual page 7

Spray pipe with spray gun
1
The spray gun only allows the machine to be operated when the safety trigger (no.
1) is pulled.
The spray gun can be used when the safety trigger is pulled. The liquid is then
pumped up to the nozzle. Spray pressure builds up and quickly reaches the
selected operating pressure.
When the trigger is released the gun is closed, which prevents any further liquid
from coming out of the spray pipe.
The recoil resulting from the gun being closed opens the pressure control valve in
the machine. The pump remains switched on and pumps the circuit with reduced
overpressure. When the gun is opened (trigger pressed) the pressure control valve
closes and the pump starts to operate again at the selected pressure.
If the gun is closed for longer than 20 seconds, the machine switches off. The pump
then restarts automatically when the gun is re-opened, provided the master switch
is on.
After completing work with your Kränzle therm , or if work is interrupted, the safety
catch (no. 2) must be applied. This makes it impossible to press the trigger by
accident.
3
may only be performed by trained personnel. If spare parts are
required, use only those approved by the maker.
Description
The spray gun has bulit-in pressure regulation. If
the red ring on the handgrip (item 3) is turned to
the right the pressure reduces, and it increases
if turned to the left. But the manometer will still
indicate the pressure set on the control valve.
The spray gun is a safety device. Repairs
2
7