Bezel-Release Latch - IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual

Bezel-release latch

Before you begin:
v Read Appendix B, "Safety information," on page 125.
v Review the information in "System reliability considerations" on page 23.
To remove the bezel-release latch, complete the following steps:
1. Turn off the computer, if it is on.
2. Disconnect the power cord from the power source and from the computer; then,
3. Remove the side cover (see "Removing the side cover" on page 25).
4. Remove the front bezel (see "Removing the bezel" on page 26).
5. Remove the CD-ROM drive (see "CD-ROM drive" on page 61).
6. Pull down from inside the computer to release the latch tab.
7. From the underside, grasp the bezel-release latch in the center, and gently pull
disconnect all external cables.
it back and away from the computer.
Chapter 5. Field replaceable units
79