Bezel-Release Latch - IBM IntelliStation M Pro Hardware Maintenance Manual

5. Press the drive retaining tab, gently slide the diskette drive toward the front of

Bezel-release latch

Before you begin:
v Read "Safety information" on page 129.
v Read "Installation guidelines" on page 31.
v Review the information in "System reliability considerations" on page 31.
To remove the bezel-release latch, complete the following steps:
1. Turn off the computer and all attached devices; then, disconnect all external
2. Remove the side cover. See "Removing the side cover" on page 52.
3. Remove the front bezel. See "Removing the front bezel" on page 84.
4. Remove the handle assembly. See "Handle assembly" on page 97.
5. Remove the top/side cover. See "Top/side cover" on page 95.
6. Press down on the tab.
94
IBM IntelliStation M Pro Types 6220 and 6230: Hardware Maintenance Manual
the computer, and lift it out.
cables and power cords. See "Turning off the computer" on page 10.
94
13