System Board Jumpers And Switches - IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual

System board jumpers and switches

This section describes the jumpers and switches on the system board.
System reset
(JRST1)
Jumper
Auto system restart (JP3) (device
driver required for ASR
functionality)
Configuration (JCON1)
CMOS (JCMOS1)
Power-on bypass (SW2)
Reserved (JP1, JP2)
System reset (JRST1)
Auto system
restart (JP3)
Reserved
(JP1, JP2)
Power-on
bypass (SW2)
v Auto restart enabled (default) (no jumper)
v Auto restart disabled (with jumper)
v Normal (default) (jumper on pins 1 and 2)
v Configuration (jumper on pins 2 and 3)
v BIOS crisis recovery (no jumper)
v Keep CMOS data (default) (jumper on pins 1 and 2)
v Clear CMOS data (jumper on pins 2 and 3 with power cords removed from
server)
v Press to bypass power-on button
v No jumper (default)
v Normal (default) (no jumper)
v Force system reset (debug only) (with jumper)
Configuration
(JCON1)
CMOS
(JCMOS1)
Settings
Chapter 5. Field replaceable units
75