Remove Front Door And Latch Plate, Move Uepo Panel <= Ssr Task - IBM Power775 Service Procedure
Disk enclosure rails service procedure
Hide thumbs
Also See for Power775:
- Service procedure (23 pages) ,
- Service procedure (171 pages) ,
- Service procedure (32 pages)
Table of Contents
Advertisement
3.6 Remove Front Door and Latch Plate, Move UEPO Panel <= SSR TASK
STEP 14
Remove the front door. The front door weighs 37lbs (16.8 kg).
CAUTION:
Face the inside of the door and place hands on the cross bars (see Figure 13 Removal of Front Door)
•
Lift straight up off the hinge pins (see Figure 14 Door Hinge Pin)
•
Power775 Disk Enclosure Rail Service Procedure
Sharp edges, corners, or joints nearby. (L006)
Figure 13 Removal of Front Door
Figure 14 Door Hinge Pin
24 of 57
Advertisement
Table of Contents
