IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual page 96

Note: See "System replaceable units" on page 117 to determine which components should be replaced by a field
service technician.
Error code/symptom
129
(Internal cache (L1) error)
151
(Real time clock error)
161
(Real time clock battery error)
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration.
163
(Real-time clock error)
164
(Memory configuration changed.)
175
(EEPROM CRC #1 damaged.)
184
(Power-on password damaged)
185
(Drive startup sequence information
corrupted)
187
(VPD serial number not set.)
188
(EEPROM CRC #2 damaged.)
189
(An attempt made to enter the system with
invalid passwords)
196
(Microprocessor cache mismatch)
198
(Microprocessor speed mismatch)
199
(Microprocessors not in recommended
configurations)
201
(Memory test error.)
86
IntelliStation Z Pro Types 6223 and 6227: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Optional microprocessor
2. Microprocessor
1. Battery
2. System board
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. If Remote Supervisor Adapter II is installed, make sure that the
latest firmware is installed.
2. System board
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Make sure that microprocessors are of same type and speed.
2. Microprocessor.
1. Make sure that microprocessors are of same type and speed.
2. Microprocessor.
1. Make sure that microprocessors are of same type and speed.
2. Microprocessor.
1. DIMM
2. System board