Fitting The Stove Onto The Plinth; Flue Collar Top Outlet - SCAN 58-2 Assembly And Instruction Manual

Fitting the stove onto the plinth

There are two plinths for the Scan 58. You can see how to fit these
below. Use the key supplied with the service pack to make the atta-
chment secure.
Scan 58 with "see through" plinth
Scan 58 with pedestal plinth
If you have decided to connect external combustion air via the pede-
stal plinth, mount the connection piece supplied before fitting the
plinth to the stove, see page 9.
A
A
4 x Allen screws M6x60
A S S E M B LY
A

Flue collar top outlet

Your wood-burning stove has been prepared for a top outlet by the
manufacturer. Remove the cover plate from the top plate, and fit
the flue collar, the enclosed seal, and the fittings from the service
package. At the same time, fix the safety fitting crosswise to prevent
damage to the smoke deflector plate when sweeping the chimney.
B
Flue collar
Seal for
flue collar
7
B
Bracket
Safety
fitting