Interrupting or restarting a
programme
At any time you can . . .
. . . interrupt a programme:
^ Touch the U U U U sensor, or open the
appliance door.
The time stops counting down.
. . . continue a programme:
^ Close the door and touch Start.
The programme will continue.
Altering the settings
If you discover after starting a
programme that . . .
. . . the Microwave power level is too
high or too low, you can:
^ select a new level.
. . . the duration set is too short or too
long, you can:
^ interrupt the programme (touch the U U U U
sensor), use the time selector to set a
new time, and continue the
programme by touching Start.
Or alternatively:
^ use the time selector to change the
duration and continue the
programme by touching Start.
Or alternatively:
^ touch the Start sensor during
operation to increase the cooking
time. Each touch of the sensor
increases the time by another minute.
(Exception: The time increases by 30
seconds when the microwave oven is
being used at maximum power.)
Cancelling a programme
^ Touch the U U U U sensor, or open the
appliance door.
The time stops counting down.
^ Touch the # sensor.
At the end of a programme
An audible tone will sound when the
cooking programme is complete. The
oven interior lighting goes out.
The audible tone is repeated several
times. After this, a short reminder tone
sounds at regular intervals for approx.
20 minutes after the end of the
programme. You can deactivate this
function (see "Changing settings").
^ If you would like to stop the audible
tone, touch the # sensor.
Operation
35