Keep Warming Function; Quick Start (Programmable) - Miele TX2070 Operating Instructions Manual

Operation

Keep warming function

The keeping warm function will switch
on automatically at 80 W for a maximum
of 15 minutes approx. 2 minutes after
the end of a cooking programme which
has used at least 450 W, providing the
door remains closed and no sensors
are touched.
h, 80 W and H:H will light up in the
display.
Opening the door or operating one of
the sensors or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set as a separate function.
You can deactivate this function (see
"Changing the settings").

Quick start (programmable)

Touching the Start/c sensor is
sufficient to set the appliance operating
at maximum power.
Three set times are stored in the
memory:
^ 30 sec.: Touch Start /c once
^ 1 min.: Touch Start /c twice
^ 2 min.: Touch Start /c three times
Touching Start /c four times in a row
will return you to the first saved time,
etc.
The cooking duration can be increased
by touching the Start button during
operation; each time the Start button is
touched, the cooking duration is
increased by another 30 seconds.
36
Programming durations
To alter the set durations:
^ Use the "Start /c" sensor to select
the time you want to reprogramme
(touch once, twice or three times)
and hold the Start /c sensor.
^ While your finger is on the Start
sensor, alter the time with the time
selector (to max. 15 minutes).
The altered programme runs when
the Start c sensor is released.
An interruption to the power supply
will cancel any altered programmed
durations, and they will need to be
entered again.