Time Of Day Display; Setting The Time Of Day; Altering The Time Of Day; Invisible Time Display - Miele TX2070 Operating Instructions Manual

Time of day display

,
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
^ Press and release both rotary
selectors if they are retracted.

Setting the time of day

^ Connect the appliance to the mains
electricity supply.
12:00 and the + symbol will flash in
the display until the current time of
day is set.
^ Turn the time selector to set the time
of day.
^ Touch the OK sensor or + to confirm.
The set time is now saved.
You can change from the 24-hour
format to the 12-hour format (see
"Changing the settings").
32

Altering the time of day

^ Touch the + sensor.
The + symbol will flash for a few
seconds in the display.
^ Change the time of day with the time
selector while the + symbol is
flashing.
^ Touch the OK sensor or + to confirm,
otherwise the display will revert back
to the previously set time.

Invisible time display

The time display switches off and
continues to run in the background if
the appliance has not been used for
more than approx. 10 minutes. The
display appears dark.
The appliance is switched off and must
be switched on with the ON/OFF sensor
K before it can be used again.
You can change this setting if you want
the time of day always to be visible (see
"Changing the settings").