Interrupting Or Restarting A Programme; Altering The Settings; Cancelling A Programme; At The End Of A Programme - Miele M 6012 SC Operating Instructions Manual

Operation
Interrupting or restarting a
programme
At any time you can . .
. . interrupt a programme:
 Press the Stop/C button or open the
appliance door.
The time stops counting down.
. . continue a programme:
 Close the door and press Start.
The programme will continue.

Altering the settings

If you discover after starting a
programme that . .
. . the microwave power level is too
high or too low, you can
 select a new level.
. . the duration set is too short or too
long, you can
 interrupt the programme (press the
Stop/C button once), use the time
selector to set a new time and
continue the programme (press the
Start button).
Or alternatively:
 The cooking duration can be
increased by pressing Start during
operation. Each time Start is pressed,
the cooking duration is increased by
another minute (exception: the
cooking time increases in increments
of 30 seconds when the microwave is
being used at the maximum power
level).
30

Cancelling a programme

 Press the Stop/C button twice.

At the end of a programme

A signal tone will sound when the
cooking programme is complete. The
interior lighting goes out.
The signal tone will sound briefly as a
reminder every 5 minutes for
20 minutes after the end of the
programme.
 If you want to stop the signal tone,
press the Stop/C button.