Food In Oven; Interrupting Or Restarting A Programme; Altering Settings; Cancelling A Programme - Miele M 7140 TC Operating Instructions Manual

– the frequency of stirring or turning
the food.
Frequent stirring or turning heats the
food more evenly, and it is therefore
ready in a shorter time.
– the amount of food.
As a general rule, allow almost
double the time for double the
quantity.
For a smaller quantity, shorten the
duration accordingly.
– the shape and material of the
container.

Food in oven?

The message
Food in oven?
that the appliance should not be used
without food inside it.
Operating the appliance without food
can damage the appliance.
If the Start button is pressed without
the door having first been opened,
in oven? appears in the display. It is
possible that there is no food in the
appliance because the door has not
been opened for a long time. You
cannot start a process until the door is
opened.
Interrupting or restarting a
programme
At any time, you can . . .
. . . interrupt a programme:
 Open the appliance door.
The duration stops counting down.
Close the door appears in the display.
. . . continue a programme:
 Close the door and touch the
The programme will continue.

Altering settings

If you discover after starting a
programme that . . .
. . . the microwave power level is too
high or too low, you can:
 Select a new level.
. . . the duration set is too short or too
long, you can:
 Change the time using the arrow
is a reminder

Cancelling a programme

 Touch the  button twice or touch
Cancel process
Food
 Confirm with OK.

At the end of a programme

An audible tone will sound when the
cooking programme is complete. The
oven interior lighting goes out.
The audible tone is repeated several
times.
 Press the button for the selected

Keeping warm

The
automatically at the end of a cooking
programme which has been using at
least 450 W, providing the door remains
closed and no buttons are pressed.
 button.
buttons and continue the programme
(touch the  button).
the selected power level.
appears in the display.
Finished appears in the display.
power level to confirm.
Keeping warm function switches on
Operation
45