Operation Principles; Preparing The Appliance For Use; Setting The Temperature And Duration - Miele Steam oven Operating And Installation Instructions

Preparing the appliance for use

Setting the temperature and duration

2
2
^ Fill the water container with mains water up to at least the
"min" marker.
Only use cold mains tap water. Never use distilled or
mineral water or other liquids.
^ Push the water container into the appliance until it
connects.
^ Place the condensate tray on the lowest shelf level.
^ Place the food in the oven.
^ Touch the s sensor to switch the appliance on.
2 will appear in the display, "°C" and "100" will start flashing.
^ If you want to cook with 100 °C, confirm with "OK".
°C
If necessary, you can reduce the temperature by touching the
? sensor. Confirm with "OK".
Once you have confirmed the temperature, 3 zeros and "h"
will appear in the display.
^ Set the cooking duration you want by touching ; (from
h
0:00 upwards) or ? (from 9:59 downwards).
^ Confirm your selection by touching "OK".
The appliance will start automatically after the duration has
been confirmed.
If you do not complete these steps within 15 minutes, the
appliance will switch itself off.

Operation principles

21