senseFly swinglet User Manual page 24

Quick start guide
power cable
To charge a swinglet CAM battery pack, connect it to the battery charger as illus-
trated above. Make sure that the main power cables of the battery are left dis-
connected. During charge, the status LED on the charger is solid red. Charging is
complete when the status LED turns green.
The charger provided independently balances the voltage of each of the 3 cells
contained in the battery pack to ensures optimal performance and battery life. If
any of the cells is unbalanced, its associated LED will be solid red during charging
until it is re-balanced. Charging can take up to an hour, depending on the charge
level of the battery and the required cell balancing work. See section 'Proper bat-
tery care' on page 123 for more information on maintaining your drone's batteries.
To charge the camera battery, remove it from the camera and insert it into its
charger. Plug the charger into a power outlet. The charge LED becomes red when
charging begins. Once the battery is fully charged, the LED turns to green. Charg-
ing takes approximately 1 hour and 30 minutes.
If you plan on performing a flight away from an Internet connection it is useful to
preload map tiles by selecting 'Download maps... ' from the
details on how to take advantage of the various map sources available in eMotion
can be found in section 'Toolbar' on page 71.
24
3
2
LiPo Balance
1
Charger
Status
main power cables
leave disconnected
balance LEDs
status LEDs
File menu. More