senseFly swinglet User Manual page 104

Advanced functionalities
signal coverage. Un-checking this box will disable the Security action, how-
ever the In-flight warning will continue to appear.
Default value: checked
• Return to Home in case of camera malfunction: Checking this box will
enable the Security action (return to Home waypoint) related to a camera
malfunction. Un-checking this box will disable the Security action, how-
ever the In-flight warning will continue to appear.
Default value: checked
• Return to Home after 30s in case of link loss: Checking this box will en-
able In-flight warnings and Security actions related to a loss of the commu-
nications uplink between eMotion and the drone (return to Home after 30 s
of link loss). Un-checking this box disables both the In-flight warning and
the Security action and will result in the drone continuing on its flight path
even if it does not re-connect with eMotion.
Default value: unchecked
Note: Un-checking this feature is only recommended when perform-
ing a linear landing in uneven terrain where the height measured by
the ground sensor during approach would imply an undesired ap-
proach slope correction.
Clicking the 'More' list will provide further options:
• Save parameters as default in drone: Saves the currently-set flight pa-
rameters to the swinglet CAM's autopilot's memory.
• Restore factory parameters: Returns the flight parameters to their de-
fault values and automatically sends them to the drone's autopilot.
The 'General information' section displays information specific to your swinglet CAM.
This includes the current firmware and bootloader versions loaded into the au-
topilot, the serial numbers of the airframe and the autopilot, the total number of
flights performed by drone and the total time spent in the air.
104