senseFly swinglet User Manual page 107

Table of Contents

Advertisement

on the 'Enable assisted manual control' setting in the Flight Parameters tab⁴⁰ of
eMotion. Pushing the switch back towards the user will cause the drone to re-
turn to the last autonomous operation mode it was in before Manual mode was
enabled.
Caution: We recommend that you only turn the remote control on
when it is held by a pilot ready to take manual control of the drone,
and that you turn it off when putting the remote control down.
Manual control of the swinglet CAM can be achieved at any time if the drone is
within range of the remote⁴¹.
Note: As the remote control may reduce the range of the USB ground
modem, we recommend that the remote control is switched off when
not in use.
autopilot
switch
manual
auto
FM: thrust
AM: speed
left stick
⁴⁰ see section 'Flight Parameters tab' on page 102 for more details on this setting
⁴¹ see section 'Drone specifications' on page 151 for the range of the remote control
Manual control of the swinglet CAM
on/off
remote
control
FM: Full Manual
AM: Assisted Manual
FM: elevator
AM: climb/sink rate
FM: ailerons
AM: turn rate
right stick
107

Advertisement

Table of Contents
loading

Table of Contents