Rosen DP-1001 Owner's Manual page 97

4. If needed, change the city:
•
To select the city from the list of recently used ones, tap the
tS
......•• button.
• To enter a new city:
1.
Tap the button with the name of the City, or if you have changed the country/state, tap
<aty Name>
2 Start entering the city name on the keyboard
3 Get to the list of search results
• After entering a couple of characters, the names that match the string appear in a
list.
Done
• Tap to open the list of results before it appears automatically.
4.
Pick the city from the liSt.
S. Enter the street name
<Street Name>
1. Tap
2 Stari entering the street name on the keyboard
3. Get to the list of results:
• After entering a couple of characters, the names that match the string appear in a list.
Done
• Tap to open the lIst of results before it appears automatically.
4 Pick the street from the list.
G Enter the house number:
1.
2.
<
HQu" Number>
Tap . ..
Enter the house number on the keyboard.
Done
3. Tap to finish entering the address.
7.
The map appears with the selected point in the middle.
TapF~as~~
The route is then automatically calculated, and you can start navigating.
from the Cursor menu.
3.1.2.3 I<:ntering
.In
address if house numbering is restat'ted
There are long roads where the house numbering is restarted at some point. This way the same house number
can appear twice or even more times on the same road. If this is the case, after giving the house number, you
need to select the appropriate address by the district/suburb information.
The procedure is explained starting from the NaVigation menu
E8" . .
1 '"
Tapthefollowlng buttons:
Mem.t,"Plrll:, f'04~"!!'
22
4. If needed, change the city:
•
To select the city from the list of recently used ones, tap the
tS
......•• button.
• To enter a new city:
1.
Tap the button with the name of the City, or if you have changed the country/state, tap
<aty Name>
2 Start entering the city name on the keyboard
3 Get to the list of search results
• After entering a couple of characters, the names that match the string appear in a
list.
Done
• Tap to open the list of results before it appears automatically.
4.
Pick the city from the liSt.
S. Enter the street name
<Street Name>
1. Tap
2 Stari entering the street name on the keyboard
3. Get to the list of results:
• After entering a couple of characters, the names that match the string appear in a list.
Done
• Tap to open the lIst of results before it appears automatically.
4 Pick the street from the list.
G Enter the house number:
1.
2.
<
HQu" Number>
Tap . ..
Enter the house number on the keyboard.
Done
3. Tap to finish entering the address.
7.
The map appears with the selected point in the middle.
TapF~as~~
The route is then automatically calculated, and you can start navigating.
from the Cursor menu.
3.1.2.3 I<:ntering
.In
address if house numbering is restat'ted
There are long roads where the house numbering is restarted at some point. This way the same house number
can appear twice or even more times on the same road. If this is the case, after giving the house number, you
need to select the appropriate address by the district/suburb information.
The procedure is explained starting from the NaVigation menu
E8" . .
1 '"
Tapthefollowlng buttons:
Mem.t,"Plrll:, f'04~"!!'
22
4. If needed, change the city:
•
To select the city from the list of recently used ones, tap the
tS
......•• button.
• To enter a new city:
1.
Tap the button with the name of the City, or if you have changed the country/state, tap
<aty Name>
2 Start entering the city name on the keyboard
3 Get to the list of search results
• After entering a couple of characters, the names that match the string appear in a
list.
Done
• Tap to open the list of results before it appears automatically.
4.
Pick the city from the liSt.
S. Enter the street name
<Street Name>
1. Tap
2 Stari entering the street name on the keyboard
3. Get to the list of results:
• After entering a couple of characters, the names that match the string appear in a list.
Done
• Tap to open the lIst of results before it appears automatically.
4 Pick the street from the list.
G Enter the house number:
1.
2.
<
HQu" Number>
Tap . ..
Enter the house number on the keyboard.
Done
3. Tap to finish entering the address.
7.
The map appears with the selected point in the middle.
TapF~as~~
The route is then automatically calculated, and you can start naVigating.
from the Cursor menu.
3.1.2.3 I<:ntering
.In
address if house numbering is restat'ted
There are long roads where the house numbering is restarted at some point. This way the same house number
can appear twice or even more times on the same road. If this is the case, after giving the house number, you
need to select the appropriate address by the district/suburb information.
The procedure is explained starting from the NaVigation menu
E8" . .
1 '"
Tapthefollowlng buttons:
Mem.t,"Plrll:, f'04~"!!'
22