Rosen DP-1001 Owner's Manual page 96

3. Tap to open the Cursor menu.
4.
The map appears with the selected point in the middle Tap
~ ~To
(Simple mode) or
·~~a~~on>.
(Advanced mode) from the Cursor menu. The route is then automatically calculated,
and you can start navigating
If you know that you will use a destination later, when the Cursor menu appears, save it as a
POI, or put it on the list of your Favorites first. The Cursor menu returns automatically with the
same point. Now you can use it as a route point.
3.1.2 Entering an
address
or part of an
add.'ess
If you know at least a part of the addr-ess,
it
is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
• the exact address, including house number
• the center of a city
• an intersection
• the midpoint of a street
• any of the above, starting the search with the ZIP code (page 26)
3.1.2.2 Entering an address (North
Ame.-ic'l. Australia)
In some countries, the state is also used in addresses. If you are in one of these countries, or choose any of
them from the list of countries, five lines appear on the screen:
The procedure is explained starting from the NaVigation menu.
ES
1. Tap the following buttons:
t;;r~~i-;·,
.1It
-fl~-~
2. By default, Rosen Navigation proposes the country, state and city where you are If needed, tap the
button vvith the name of the country, and select a different one from the list. If you select a new country,
i;';~:~;..t£
.
;;~'111"'states>'-'
you also need to select the state, or tap ;\;i(\-;'··:·>~:
.:c,
to search for a city regardless of the state
it
is in.
3. If you have not changed the country, you still have the possibility to change the state. Tap the button with
the name of the state, and select from the list
21
3. Tap to open the Cursor menu.
4.
The map appears with the selected point in the middle Tap
~ ~To
(Simple mode) or
·~~a~~on>.
(Advanced mode) from the Cursor menu. The route is then automatically calculated,
and you can start navigating
If you know that you will use a destination later, when the Cursor menu appears, save it as a
POI, or put it on the list of your Favorites first. The Cursor menu returns automatically with the
same point. Now you can use it as a route point.
3.1.2 Entering an
address
or part of an
add.'ess
If you know at least a part of the addr-ess,
it
is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
• the exact address, including house number
• the center of a city
• an intersection
• the midpoint of a street
• any of the above, starting the search with the ZIP code (page 26)
3.1.2.2 Entering an address (North
Ame.-ic'l. Australia)
In some countries, the state is also used in addresses. If you are in one of these countries, or choose any of
them from the list of countries, five lines appear on the screen:
The procedure is explained starting from the NaVigation menu.
ES
1. Tap the following buttons:
t;;r~~i-;·,
.1It
-fl~-~
2. By default, Rosen Navigation proposes the country, state and city where you are If needed, tap the
button vvith the name of the country, and select a different one from the list. If you select a new country,
i;';~:~;..t£
.
;;~'111"'states>'-'
you also need to select the state, or tap ;\;i(\-;'··:·>~:
.:c,
to search for a city regardless of the state
it
is in.
3. If you have not changed the country, you still have the possibility to change the state. Tap the button with
the name of the state, and select from the list
21
3. Tap to open the Cursor menu.
4.
The map appears with the selected point in the middle Tap
~ ~To
(Simple mode) or
·~~a~~on>.
(Advanced mode) from the Cursor menu. The route is then automatically calculated,
and you can start navigating
If you know that you will use a destination later, when the Cursor menu appears, save it as a
POI, or put it on the list of your Favorites first. The Cursor menu returns automatically with the
same point. Now you can use it as a route point.
3.1.2 Entering an
address
or part of an
add.'ess
If you know at least a part of the addr-ess,
it
is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
• the exact address, including house number
• the center of a city
• an intersection
• the midpoint of a street
• any of the above, starting the search with the ZIP code (page 26)
3.1.2.2 Entering an address (North
Ame.-ic'l. Australia)
In some countries, the state is also used in addresses. If you are in one of these countries, or choose any of
them from the list of countries, five lines appear on the screen:
The procedure is explained starting from the NaVigation menu.
ES
1. Tap the following buttons:
t;;r~~i-;·,
.1It
-fl~-~
2. By default, Rosen Navigation proposes the country, state and city where you are If needed, tap the
button vvith the name of the country, and select a different one from the list. If you select a new country,
i;';~:~;..t£
.
;;~'111"'states>'-'
you also need to select the state, or tap ;\;i(\-;'··:·>~:
.:c,
to search for a city regardless of the state
it
is in.
3. If you have not changed the country, you still have the possibility to change the state. Tap the button with
the name of the state, and select from the list
21