Rosen DP-1001 Owner's Manual page 131

Button Description
account (eg emergency vehicles have only a few restrictions)
Road Types Used for Route
To let the route fit your needs, you can also set which road types are to be
Planning
considered for or to be excluded from the route, If possible,
Excluding a route is a preference. It does not necessarily mean total
prohibition If your destination can only be accessed using some of the
excluded road types, they will be used, but only as much as necessary. In
this case a warning icon will be shown on the Route Information screen, and
the part of the route not matching your preference will be displayed in a
different color on the map.
Route Calculation Method
You can choose from different route types The routing method can also be
chosen wh ile creating the route when the destination is selected, tap
~.
.
~
Routing Methods
in the Cursor menu
Use Traffic Information When TMC messages are received, thiS setting tells Rosen Navigation
whether to use that information in route planning.
Recalculate to Avoid Traffic
This setting determines how Rosen Navigation uses the received TMC
information in route recalculation
•
l\utomatic When route recalculation becomes necessary based on
the received TMC events, Rosen Navigation recalculates the route
automatically
•
Manual: When route recalculation becomes necessary based on the
received TMC events, Rosen Navigation notifies you, but you can
decide whether to recalculate the route or not
•
Disabled TMC events are only taken account when the route is
recalculated In an off-route Situation.
ROild
Types Used for'
Route Phmning:
Type Description
Highways You might need to avoid highways when you are driving a slow car or you are towing another
vehicle.
Unpaved Rosen Navigation excludes unpaved roads by default: unpaved roads can be in a bad condition
roads and usually you cannot reach the speed limit on them
Toll roads
By
default Rosen NaVigation includes toll roads (pay roads where there is a per-use charge) in
the routes. If you disable toll roads. Rosen Navigation plans the best toll-free route
Charge roads
Charge roads are pay roads where you can purchase a pass or vignette to use the road for a
longer period of time. They can be enabled or disabled separately from toll roads.
Permit
You might need a permit or permission from the owners to use certain roads or to enter certain
needed
areas Rosen NaVigation excludes these roads from the route calculation
by
default
Ferries
Rosen NaVigation includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries You might also need
to pay a fare on ferries.
Cross-border
In some cases the route calculated according to your other navigation and route preferences
56
Button Description
account (eg emergency vehicles have only a few restrictions)
Road Types Used for Route
To let the route fit your needs, you can also set which road types are to be
Planning
considered for or to be excluded from the route, If possible,
Excluding a route is a preference. It does not necessarily mean total
prohibition If your destination can only be accessed using some of the
excluded road types, they will be used, but only as much as necessary. In
this case a warning icon will be shown on the Route Information screen, and
the part of the route not matching your preference will be displayed in a
different color on the map.
Route Calculation Method
You can choose from different route types The routing method can also be
chosen wh ile creating the route when the destination is selected, tap
~.
.
~
Routing Methods
in the Cursor menu
Use Traffic Information When TMC messages are received, thiS setting tells Rosen Navigation
whether to use that information in route planning.
Recalculate to Avoid Traffic
This setting determines how Rosen Navigation uses the received TMC
information in route recalculation
•
l\utomatic When route recalculation becomes necessary based on
the received TMC events, Rosen Navigation recalculates the route
automatically
•
Manual: When route recalculation becomes necessary based on the
received TMC events, Rosen Navigation notifies you, but you can
decide whether to recalculate the route or not
•
Disabled TMC events are only taken account when the route is
recalculated In an off-route Situation.
ROild
Types Used for'
Route Phmning:
Type Description
Highways You might need to avoid highways when you are driving a slow car or you are towing another
vehicle.
Unpaved Rosen Navigation excludes unpaved roads by default: unpaved roads can be in a bad condition
roads and usually you cannot reach the speed limit on them
Toll roads
By
default Rosen Navigation includes toll roads (pay roads where there is a per-use charge) in
the routes. If you disable toll roads. Rosen Navigation plans the best toll-free route
Charge roads
Charge roads are pay roads where you can purchase a pass or vignette to use the road for a
longer period of time. They can be enabled or disabled separately from toll roads.
Permit
You might need a permit or permission from the owners to use certain roads or to enter certain
needed
areas Rosen NaVigation excludes these roads from the route calculation
by
default
Ferries
Rosen NaVigation includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries You might also need
to pay a fare on ferries.
Cross-border
In some cases the route calculated according to your other navigation and route preferences
56
Button Description
account (eg emergency vehicles have only a few restrictions)
Road Types Used for Route
To let the route fit your needs, you can also set which road types are to be
Planning
considered for or to be excluded from the route, If possible,
Excluding a route is a preference. It does not necessarily mean total
prohibition If your destination can only be accessed using some of the
excluded road types, they will be used, but only as much as necessary. In
this case a warning icon will be shown on the Route Information screen, and
the part of the route not matching your preference will be displayed in a
different color on the map.
Route Calculation Method
You can choose from different route types The routing method can also be
chosen wh ile creating the route when the destination is selected, tap
~.
.
~
Routing Methods
in the Cursor menu
Use Traffic Information When TMC messages are received, thiS setting tells Rosen Navigation
whether to use that information in route planning.
Recalculate to Avoid Traffic
This setting determines how Rosen Navigation uses the received TMC
information in route recalculation
•
l\utomatic When route recalculation becomes necessary based on
the received TMC events, Rosen Navigation recalculates the route
automatically
•
Manual: When route recalculation becomes necessary based on the
received TMC events, Rosen Navigation notifies you, but you can
decide whether to recalculate the route or not
•
Disabled TMC events are only taken account when the route is
recalculated In an off-route Situation.
ROild
Types Used for'
Route Phmning:
Type Description
Highways You might need to avoid highways when you are driving a slow car or you are towing another
vehicle.
Unpaved Rosen Navigation excludes unpaved roads by default: unpaved roads can be in a bad condition
roads and usually you cannot reach the speed limit on them
Toll roads
By
default Rosen Navigation includes toll roads (pay roads where there is a per-use charge) in
the routes. If you disable toll roads. Rosen Navigation plans the best toll-free route
Charge roads
Charge roads are pay roads where you can purchase a pass or vignette to use the road for a
longer period of time. They can be enabled or disabled separately from toll roads.
Permit
You might need a permit or permission from the owners to use certain roads or to enter certain
needed
areas Rosen NaVigation excludes these roads from the route calculation
by
default
Ferries
Rosen NaVigation includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries You might also need
to pay a fare on ferries.
Cross-border
In some cases the route calculated according to your other navigation and route preferences
56