Rosen DP-1001 Owner's Manual page 151

BEFORE YOU START THE INSTALLATION, READ THIS GUIDEI
Rosen Multi-Media systems are the easiest-to-install OEM Radio replacement systems available today. However, we
strongly recommend reading this guide before starting the installation!
For additional technical tips, please visit
www.Rosendealercentral.com
Although the Touch Screens on this system were calibrated at the Factory, you may find it necessary adjust the calibration
setting on your unit if you notice that the Button Presses do not actuation properly.
»>
There are TWO Different Touch Calibrations
«<
1 - Main Touch Screen Calibration
To Calibrate the Main Screen Follow these easy steps:
1) Select MAIN in the Upper Left Corner of the Screen
2) Select SETUP in the Lower Right Screen
3) Select CONTROL ADJUST in the Lower Right Screen
4) Select SCREEN ADJUST in the Left Side of the Screen
5) Follow the On Screen Directions
2 - Navigation Touch Screen Calibration
To Calibrate the Navigation Touch Screen Follow these easy steps:
1) Turn the Vehicle OFF and wait for the Unit to power down
2) Turn the Vehicle ON and wait for the Self Test to finish
3) Select the NAV BUTTON on the Face of the unit (not the Touch Screen)
4) Wait for the Screen displaying "Map loading. please wait !" to appear
5) Touch the Screen (Within 5 seconds) and follow the On Screen Directions
NOTE: For Vehicle
Specific Units, this
screen is not
displayed
Rosen Entertainment Systems
Multi-Media Navigation System Installation Guide
Copyright 2008 all rights reserved
OS Calibration IG Rev A