Rosen DP-1001 Owner's Manual page 133

Button
Description
available.
Time and Time Zone Settings You can access time and time zone settings Rosen Navigation helps you
with correcting the device time to the ever accurate GPS time. Rosen
Navigation can also help you set the time zone based on your current GPS
position.
Time and Time Zone Settings:
Button Description
Auto Time Correction to GPS Use this feature to synchronize the clock of your device to the very accurate
time provided by the GPS receiver
Use Auto Time Zone
Use this feature to synchronize the time zone of the clock of your device to
the time zone based on your current GPS position
Set Time Zone Set time zone manually if you do not want to synchronize the time zone
automatically This allows you to use Auto Time Correction and apply a time
zone offset to obtain the desired time.
Compare GPS and device times The current time of the GPS receiver and the device clock are displayed.
Please note that the GPS clock is only available with GPS reception. This
allows you to check whether any correction is needed.
4.5.4 Navigation settings
You can control how Rosen Navigation behaves during navigation Tap the following buttons
-
Button Description
Keep Position on Road
This feature allows car drivers to always correct GPS position errors by
matching the vehicle position to the road network. For pedestrian navigation,
this feature is automatically disabled to let the softvvare show your exact
position
By turning off this feature you also turn off the GPS position error filtering
The position shown on the map will be subject to all position errors and
position fluctuations.
C':f-route Recalculation
This switch tells Rosen Navigation whether to automatically recalculate the
route when you deviate from It If this feature is turned off, you need to initiate
route recalculation manually otherwise navigation will be stopped until you
return to the originally recommended route.
Setting another point than the current GPS position as the start point of the
active route will automatically disable thiS feature
Restore Lock-to-Position
If you have moved or rotated the map during naVigation, this feature moves
the map back to your current GPS position and re-enables automatic map
rotation after the given period of inactivity.
58
Button
Description
available.
Time and Time Zone Settings You can access time and time zone settings Rosen Navigation helps you
with correcting the device time to the ever accurate GPS time. Rosen
Navigation can also help you set the time zone based on your current GPS
position.
Time and Time Zone Settings:
Button Description
Auto Time Correction to GPS Use this feature to synchronize the clock of your device to the very accurate
time provided by the GPS receiver
Use Auto Time Zone
Use this feature to synchronize the time zone of the clock of your device to
the time zone based on your current GPS position
Set Time Zone Set time zone manually if you do not want to synchronize the time zone
automatically This allows you to use Auto Time Correction and apply a time
zone offset to obtain the desired time.
Compare GPS and device times The current time of the GPS receiver and the device clock are displayed.
Please note that the GPS clock is only available with GPS reception. This
allows you to check whether any correction is needed.
4.5.4 Navigation settings
You can control how Rosen Navigation behaves during navigation Tap the following buttons
-
Button Description
Keep Position on Road
This feature allows car drivers to always correct GPS position errors by
matching the vehicle position to the road network. For pedestrian navigation,
this feature is automatically disabled to let the softvvare show your exact
position
By turning off this feature you also turn off the GPS position error filtering
The position shown on the map will be subject to all position errors and
position fluctuations.
C':f-route Recalculation
This switch tells Rosen Navigation whether to automatically recalculate the
route when you deviate from It If this feature is turned off, you need to initiate
route recalculation manually otherwise navigation will be stopped until you
return to the originally recommended route.
Setting another point than the current GPS position as the start point of the
active route will automatically disable thiS feature
Restore Lock-to-Position
If you have moved or rotated the map during naVigation, this feature moves
the map back to your current GPS position and re-enables automatic map
rotation after the given period of inactivity.
58
Button
Description
available.
Time and Time Zone Settings You can access time and time zone settings Rosen Navigation helps you
with correcting the device time to the ever accurate GPS time. Rosen
Navigation can also help you set the time zone based on your current GPS
position.
Time and Time Zone Settings:
Button Description
Auto Time Correction to GPS Use this feature to synchronize the clock of your device to the very accurate
time provided by the GPS receiver
Use Auto Time Zone
Use this feature to synchronize the time zone of the clock of your device to
the time zone based on your current GPS position
Set Time Zone Set time zone manually if you do not want to synchronize the time zone
automatically This allows you to use Auto Time Correction and apply a time
zone offset to obtain the desired time.
Compare GPS and device times The current time of the GPS receiver and the device clock are displayed.
Please note that the GPS clock is only available with GPS reception. This
allows you to check whether any correction is needed.
4.5.4 Navigation settings
You can control how Rosen Navigation behaves during navigation Tap the following buttons
-
Button Description
Keep Position on Road
This feature allows car drivers to always correct GPS position errors by
matching the vehicle position to the road network. For pedestrian naVigation,
this feature is automatically disabled to let the softvvare show your exact
position
By turning off this feature you also turn off the GPS position error filtering
The position shown on the map will be subject to all position errors and
position fluctuations.
C':f-route Recalculation
This switch tells Rosen Navigation whether to automatically recalculate the
route when you deviate from It If this feature is turned off, you need to initiate
route recalculation manually otherwise navigation will be stopped until you
return to the originally recommended route.
Setting another point than the current GPS position as the start point of the
active route will automatically disable thiS feature
Restore Lock-to-Position
If you have moved or rotated the map during naVigation, this feature moves
the map back to your current GPS position and re-enables automatic map
rotation after the given period of inactivity.
58