Deleting The Ne:x't Via Point/Rom The Route - Rosen DP-1001 Owner's Manual

3.5 \Vatching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen
W:I(f,
1.
Tap the following buttons: ,~ft~~~,R-;;';ti'"".
2. The Route menu appears.
Simulate
3.
rap to run the simulation at normal speed and with voice guidance instructions
announced. This option is for demonstration purposes, or for checking difficult parts of the route in
advance.
The simulation can be aborted any time by tapping
iii.
3.6 Enabling Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While
driving, you will not be able to set a new destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen
Tap the following buttons
3.7 Pausing the active route
You do not need to pause the active route when you start driVing again, Rosen Navigation restarts the voice
instructions from your position.
SkIp Next Via
Skip Next Via
3.8 Deleting the next via point f"om the route
The easiest way to delete the uPCIijII route point (the next via point) is to open the Route Information screen
by tapping the Turn Preview field
( i i i )
on the Map screen, and then tapping .
;",·,······,,··· ..··"1:
WI,
You have another option Tap the following
buttons:ii;~t,
'
32
3.5 \Vatching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen
W:I(f,
1.
Tap the following buttons: ,~ft~~~,R-;;';ti'"".
2. The Route menu appears.
Simulate
3.
rap to run the simulation at normal speed and with voice guidance instructions
announced. This option is for demonstration purposes, or for checking difficult parts of the route in
advance.
The simulation can be aborted any time by tapping
iii.
3.6 Enabling Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While
driving, you will not be able to set a new destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen
Tap the following buttons
3.7 Pausing the active route
You do not need to pause the active route when you start driVing again, Rosen Navigation restarts the voice
instructions from your position.
SkIp Next Via
Skip Next Via
3.8 Deleting the next via point f"om the route
The easiest way to delete the uPCIijII route point (the next via point) is to open the Route Information screen
by tapping the Turn Preview field
( i i i )
on the Map screen, and then tapping .
;",·,······,,··· ..··"1:
WI,
You have another option Tap the following
buttons:ii;~t,
'
32
3.5 \Vatching the simulation of the route
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen
W:I(f,
1.
Tap the following buttons: ,~ft~~~,R-;;';ti'"".
2. The Route menu appears.
Simulate
3.
rap to run the simulation at normal speed and with voice guidance instructions
announced. This option is for demonstration purposes, or for checking difficult parts of the route in
advance.
The simulation can be aborted any time by tapping
iii.
3.6 Enabling Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While
driving, you will not be able to set a new destination or to change settings. The only screen control that remains
enabled is the gesture that puts you back on the Map screen.
The procedure is explained starting from the Map screen
Tap the following buttons
3.7 Pausing the active route
You do not need to pause the active route when you start driVing again, Rosen Navigation restarts the voice
instructions from your position.
SkIp Next Via
Skip Next Via
3.8 Deleting the next via point f"om the route
The easiest way to delete the uPCIijII route point (the next via point) is to open the Route Information screen
by tapping the Turn Preview field
( i i i )
on the Map screen, and then tapping .
;",·,······,,··· ..··"1:
WI,
You have another option Tap the following
buttons:ii;~t,
'
32