Rosen DP-1001 Owner's Manual page 91

2.4.2.2 Returning to normal na"igation
:i~:'~~~
: : _ _
? :
When GPS position is available, and you have moved the map (the
:;~
icon is moving or is not even visible),
or you have rotated the map in 3D mode, the button appears. Tap it to move the map back to the GPS
position and re-enable Track-up map orientation (automatic map rotation).
c,·,
~
@"Note ' Even if you move the map while you are driving, Rosen Navigation continues navigating if there
is an active route it plays the voice instructions and displays the turn preview icons according
to your current GPS position.
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible the
Cursor appears at the selected point on the map Rosen Navigation displays the Cursor with a radiating red dot
( a)
to make it visible at all zoom levels, even when it is in the background of a 3D map view.
is.;
When the Cursor
IS
set, tap9'~~9~i. The Cursor menu appears and you can use the Cursor as one of the
follOWing
• the start point of a route
• a via point in
a
route
• the destination of a route
You can also search for POls around the Cursor.
Or you can save the location of the Cursor as:
• a Favorite
• a POI
• a map marker Pin
2.4.2.4 Originall)Osition in the Cursor menu
,......,
When the Cursor menu is open, a special icon (
V)
shows the Cursor position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(a)
appears, and the buttons of the Cursor menu initiate actions for this new location.
...
"0~
To return to the original Cursor position, tap • . The map jumps back to the position with which the Cursor
~~
menu was opened, and the
"k'
icon appears again.
16
2.4.2.2 Returning to normal na"igation
:i~:'~~~
: : _ _
? :
When GPS position is available, and you have moved the map (the
:;~
icon is moving or is not even visible),
or you have rotated the map in 3D mode, the button appears. Tap it to move the map back to the GPS
position and re-enable Track-up map orientation (automatic map rotation).
c,·,
~
@"Note ' Even if you move the map while you are driving, Rosen Navigation continues navigating if there
is an active route it plays the voice instructions and displays the turn preview icons according
to your current GPS position.
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible the
Cursor appears at the selected point on the map Rosen Navigation displays the Cursor with a radiating red dot
( a)
to make it visible at all zoom levels, even when it is in the background of a 3D map view.
is.;
When the Cursor
IS
set, tap9'~~9~i. The Cursor menu appears and you can use the Cursor as one of the
follOWing
• the start point of a route
• a via point in
a
route
• the destination of a route
You can also search for POls around the Cursor.
Or you can save the location of the Cursor as:
• a Favorite
• a POI
• a map marker Pin
2.4.2.4 Originall)Osition in the Cursor menu
,......,
When the Cursor menu is open, a special icon (
V)
shows the Cursor position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(a)
appears, and the buttons of the Cursor menu initiate actions for this new location.
...
"0~
To return to the original Cursor position, tap • . The map jumps back to the position with which the Cursor
~~
menu was opened, and the
"k'
icon appears again.
16
2.4.2.2 Returning to normal na"igation
:i~:'~~~
: : _ _
? :
When GPS position is available, and you have moved the map (the
:;~
icon is moving or is not even visible),
or you have rotated the map in 3D mode, the button appears. Tap it to move the map back to the GPS
position and re-enable Track-up map orientation (automatic map rotation).
c,·,
~
@"Note ' Even if you move the map while you are driving, Rosen Navigation continues navigating if there
is an active route it plays the voice instructions and displays the turn preview icons according
to your current GPS position.
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible the
Cursor appears at the selected point on the map Rosen Navigation displays the Cursor with a radiating red dot
( a)
to make it visible at all zoom levels, even when it is in the background of a 3D map view.
is.;
When the Cursor
IS
set, tap9'~~9~i. The Cursor menu appears and you can use the Cursor as one of the
follOWing
• the start point of a route
• a via point in
a
route
• the destination of a route
You can also search for POls around the Cursor.
Or you can save the location of the Cursor as:
• a Favorite
• a POI
• a map marker Pin
2.4.2.4 Originall)Osition in the Cursor menu
,......,
When the Cursor menu is open, a special icon (
V)
shows the Cursor position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(a)
appears, and the buttons of the Cursor menu initiate actions for this new location.
...
"0~
To return to the original Cursor position, tap • . The map jumps back to the position with which the Cursor
~~
menu was opened, and the
"k'
icon appears again.
16