Rosen DP-1001 Owner's Manual page 135

In-dash multi-media system
Hide thumbs Also See for DP-1001:
Table of Contents

Advertisement

Button
Description
Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your
attention on the road. While driving, you will not be able to set a new destination or
to change settings. The only screen control that remains enabled is the gesture
that puts you back on the Map screen
4.5.6 TMC settings
You can set up tile connection to the TMC receiver. If the TMC receiver is working, you can select the radio
station to be received. Tap the following buttons:
I&i~~!\:ii{';i;!i{
If there is no TMC receiver connected to Rosen Navigation, you have the following options
Button
Description
No TMC Hardware Found!
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting tile TMC receiver is automatic in Rosen Navigation, so normally
you will not need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver and the
application
Port
The communication port used between the TMC receiver and the application.
Baud Rate
The comm unication speed used between the TMC receiver and the
application
Auto detect
Tap this button and let Rosen Navigation find and connect the TMC receiver
With a TMC receiver already connected, the content of the screen is different:
Button
Description
Use Auto-tuner
If Auto-tuner is turned on, the tuner of Rosen Navigation sweeps through the
FM CCIR radio band searching for a TMC signal. The first station with TMC
data will be used automatically. When no TMC signal is available, the tuner
keeps on searching. Turn off Auto-tuner to select a radio station manually
I
frf?r~;L~!i, Jt~~;2'
When Auto-tuner is turned off, search for the desired radio station manually
with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on an
exception list, and make Rosen Navigation search for another station
instead.
Show Excluded Stations
This button opens the list of radio stations previously excluded. You can re-
enable any or all of the excluded stations.
60
Button
Description
Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your
attention on the road. While driving, you will not be able to set a new destination or
to change settings. The only screen control that remains enabled is the gesture
that puts you back on the Map screen
4.5.6 TMC settings
You can set up tile connection to the TMC receiver. If the TMC receiver is working, you can select the radio
station to be received. Tap the following buttons:
I&i~~!\:ii{';i;!i{
If there is no TMC receiver connected to Rosen Navigation, you have the following options
Button
Description
No TMC Hardware Found!
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting tile TMC receiver is automatic in Rosen Navigation, so normally
you will not need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver and the
application
Port
The communication port used between the TMC receiver and the application.
Baud Rate
The comm unication speed used between the TMC receiver and the
application
Auto detect
Tap this button and let Rosen Navigation find and connect the TMC receiver
With a TMC receiver already connected, the content of the screen is different:
Button
Description
Use Auto-tuner
If Auto-tuner is turned on, the tuner of Rosen Navigation sweeps through the
FM CCIR radio band searching for a TMC signal. The first station with TMC
data will be used automatically. When no TMC signal is available, the tuner
keeps on searching. Turn off Auto-tuner to select a radio station manually
I
frf?r~;L~!i, Jt~~;2'
When Auto-tuner is turned off, search for the desired radio station manually
with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on an
exception list, and make Rosen Navigation search for another station
instead.
Show Excluded Stations
This button opens the list of radio stations previously excluded. You can re-
enable any or all of the excluded stations.
60
Button
Description
Safety Mode
Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your
attention on the road. While driving, you will not be able to set a new destination or
to change settings. The only screen control that remains enabled is the gesture
that puts you back on the Map screen
4.5.6 TMC settings
You can set up tile connection to the TMC receiver. If the TMC receiver is working, you can select the radio
station to be received. Tap the following buttons:
I&i~~!\:ii{';i;!i{
If there is no TMC receiver connected to Rosen Navigation, you have the following options
Button
Description
No TMC Hardware Found!
The first line of the screen informs you about the connection status of the
GPS receiver.
Connecting tile TMC receiver is automatic in Rosen Navigation, so normally
you will not need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver and the
application
Port
The communication port used between the TMC receiver and the application.
Baud Rate
The comm unication speed used between the TMC receiver and the
application
Auto detect
Tap this button and let Rosen Navigation find and connect the TMC receiver
With a TMC receiver already connected, the content of the screen is different:
Button
Description
Use Auto-tuner
If Auto-tuner is turned on, the tuner of Rosen Navigation sweeps through the
FM CCIR radio band searching for a TMC signal. The first station with TMC
data will be used automatically. When no TMC signal is available, the tuner
keeps on searching. Turn off Auto-tuner to select a radio station manually
I
frf?r~;L~!i, Jt~~;2'
When Auto-tuner is turned off, search for the desired radio station manually
with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on an
exception list, and make Rosen Navigation search for another station
instead.
Show Excluded Stations
This button opens the list of radio stations previously excluded. You can re-
enable any or all of the excluded stations.
60

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds-hy0910Vw0710Hd820

Table of Contents