Rosen DP-1001 Owner's Manual page 117

Button
Info
More Options...
, . Iltinove start .
Description
Displayed at the Cursor if it has been relocated since the Cursor menu was
opened.
Opens a new screen with the address and coordinate of the Cursor, and the list of
nearby POls
Opens the full-screen Cursor menu with all the possible options.
A new route is calculated with the Cursor as the destination The previous route is
deleted
If the Cursor is at or near the destination, this button replaces the previous one,
and deletes the current destination from the route The last via point is promoted
as destination, or if there are no via points. the route is deleted.
The Cursor is added to the active route as an intermediate route point, a point to
be reached before the destination. If there
IS
already a via pOint in the route, the
Edit Route screen opens to let you decide where the new via point is to appear in
the route.
If the Cursor is at or near one of the via points, this button replaces the previous
one, and deletes the selected via point from the route. The route is recalculated
without the deleted point
The Cursor is appended at the end of the route as the new destination The
previous destination is demoted, and becomes the last via point.
!W sa
as
bestill8tion
This button is similar to the
tv~> '.
button, but a new screen opens,
and the route is calculated with all the possible route calculation methods (Fast,
Short, Economical and Easy) Observe the results, and choose one of the routes
to navigate
The Cursor becomes the start point of the route. This means that the route will not
be started from the current GPS position, and Automatic Off-route Recalculation
needs to be turned off to keep the start pomt the selected one.
If the Cursor is at or near the selected start pOint, thiS button replaces the prevIous
one, and deletes the start point from the route. The current GPS position
IS
used
again as the start point, and Automatic Off-route Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the POI group and give a name for the
POI, then select a suitable icon, enter a phone number, and additional information
if you like
Map locations can be marked with Pins Unlike POls, a Pin has no name and
other details, only a color to let you tell one from another on the map.
If the Cursor is at or near a Pin, this button replaces the previous one, and deletes
the Pin the Cursor is near to
The location of the Cursor is added to the list of frequently visited destinations, the
so called Favorites. You can give a name for the Favorite.
4.1.5 Position menu
When you follow the recommended route on the map (the Cursor is the current GPS position), the Position
menu replaces the Cursor menu. It does not contain buttons that modify the current route, as the GPS pOSition
is not useful as a route point
42
Button
Info
More Options...
, . Iltinove start .
Description
Displayed at the Cursor if it has been relocated since the Cursor menu was
opened.
Opens a new screen with the address and coordinate of the Cursor, and the list of
nearby POls
Opens the full-screen Cursor menu with all the possible options.
A new route is calculated with the Cursor as the destination The previous route is
deleted
If the Cursor is at or near the destination, this button replaces the previous one,
and deletes the current destination from the route The last via point is promoted
as destination, or if there are no via points. the route is deleted.
The Cursor is added to the active route as an intermediate route point, a point to
be reached before the destination. If there
IS
already a via pOint in the route, the
Edit Route screen opens to let you decide where the new via point is to appear in
the route.
If the Cursor is at or near one of the via points, this button replaces the previous
one, and deletes the selected via point from the route. The route is recalculated
without the deleted point
The Cursor is appended at the end of the route as the new destination The
previous destination is demoted, and becomes the last via point.
!W sa
as
bestill8tion
This button is similar to the
tv~> '.
button, but a new screen opens,
and the route is calculated with all the possible route calculation methods (Fast,
Short, Economical and Easy) Observe the results, and choose one of the routes
to navigate
The Cursor becomes the start point of the route. This means that the route will not
be started from the current GPS position, and Automatic Off-route Recalculation
needs to be turned off to keep the start pomt the selected one.
If the Cursor is at or near the selected start pOint, thiS button replaces the prevIous
one, and deletes the start point from the route. The current GPS position
IS
used
again as the start point, and Automatic Off-route Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the POI group and give a name for the
POI, then select a suitable icon, enter a phone number, and additional information
if you like
Map locations can be marked with Pins Unlike POls, a Pin has no name and
other details, only a color to let you tell one from another on the map.
If the Cursor is at or near a Pin, this button replaces the previous one, and deletes
the Pin the Cursor is near to
The location of the Cursor is added to the list of frequently visited destinations, the
so called Favorites. You can give a name for the Favorite.
4.1.5 Position menu
When you follow the recommended route on the map (the Cursor is the current GPS position), the Position
menu replaces the Cursor menu. It does not contain buttons that modify the current route. as the GPS pOSition
is not useful as a route point
42
Button
Info
More Options...
, . Iltinove start .
Description
Displayed at the Cursor if it has been relocated since the Cursor menu was
opened.
Opens a new screen with the address and coordinate of the Cursor, and the list of
nearby POls
Opens the full-screen Cursor menu with all the possible options.
A new route is calculated with the Cursor as the destination The previous route is
deleted
If the Cursor is at or near the destination, this button replaces the previous one,
and deletes the current destination from the route The last via point is promoted
as destination, or if there are no via points. the route is deleted.
The Cursor is added to the active route as an intermediate route point, a point to
be reached before the destination. If there
IS
already a via pOint in the route, the
Edit Route screen opens to let you decide where the new via point is to appear in
the route.
If the Cursor is at or near one of the via points, this button replaces the previous
one, and deletes the selected via point from the route. The route is recalculated
without the deleted point
The Cursor is appended at the end of the route as the new destination The
previous destination is demoted, and becomes the last via point.
!W sa
as
bestill8tion
This button is similar to the
tv~> '.
button, but a new screen opens,
and the route is calculated with all the possible route calculation methods (Fast,
Short, Economical and Easy) Observe the results, and choose one of the routes
to navigate
The Cursor becomes the start point of the route. This means that the route will not
be started from the current GPS position, and Automatic Off-route Recalculation
needs to be turned off to keep the start pomt the selected one.
If the Cursor is at or near the selected start pOint, thiS button replaces the prevIous
one, and deletes the start point from the route. The current GPS position
IS
used
again as the start point, and Automatic Off-route Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the POI group and give a name for the
POI, then select a suitable icon, enter a phone number, and additional information
if you like
Map locations can be marked with Pins Unlike POls, a Pin has no name and
other details, only a color to let you tell one from another on the map.
If the Cursor is at or near a Pin, this button replaces the previous one, and deletes
the Pin the Cursor is near to
The location of the Cursor is added to the list of frequently visited destinations, the
so called Favorites. You can give a name for the Favorite.
4.1.5 Position menu
When you follow the recommended route on the map (the Cursor is the current GPS position), the Position
menu replaces the Cursor menu. It does not contain buttons that modify the current route, as the GPS pOSition
is not useful as a route point
42