Surface Mount Installation Instructions - Digital Watchdog DWC-V4567WD User Manual

SURFACE MOUNT INSTALLATION INSTRUCTIONS*

1. Use the camera's mounting
template or your camera to
mark the holes as required.
4. Mount the surface mount
base (junction box) to the
wall.
2. Drill holes into the drywall and
insert the drywall mounts into
the holes.
5. Snap the camera module onto
the base by aligning the red
and black markings on the
base and the camera module.
3. Pull wires through and make
connections.
If you need to keep the wiring within the
within the camera
housing, refer to the diagram below.
9 9