Table of Contents
Advertisement
SURFACE MOUNT INSTALLATION INSTRUCTIONS*
Squeeze the sides of the
1
camera and separate the
camera module from the
dome cover.
Pull wires through and make
4
connections. Then, mount the
camera to the wall using the
included machine screws.
Use the camera's mounting
2
template or your camera to
mark the holes as required.
Adjust the camera lens
2
position by using the 3-Axis
Gimbal.
Drill holes into the drywall and
3
insert the drywall mounts into
the holes.
Snap the dome cover over
3
the camera module.
9 9
Advertisement
Table of Contents
