Usb Board - HP Pavilion 17 Maintenance And Service Manual

USB board

Description
USB board for use with HP Pavilion 17 Notebook PC computer models
USB board computer models
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the base enclosure and top cover (see
Remove the USB board and cables:
1. Disconnect the USB cable from the ZIF connector (1).
2. Remove the Phillips screw securing the USB board (2), and lift the USB board (3) to remove it.
Reverse this procedure to install the USB board and cables.
Battery on page 61).
Base enclosure on page
Spare part number
767120-001
762497-001
65).
Component replacement procedures 87