Rtc Battery - HP Pavilion 17 Maintenance And Service Manual

3. Slide the memory module forward (2) to remove it.
Reverse this procedure to install a memory module.

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the RTC battery:
1. Turn the system board upside down.
100 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 61),
WLAN module on page
System board on page
Base enclosure on page 65).
80).
89).
Spare part number
697917-001