Solid State Drive; Speakers - HP Pavilion 17 Maintenance And Service Manual

5. Lift the system board (2), and then remove the system board (3) by sliding it up and to the right at
an angle.
Reverse this procedure to install the system board.

Solid State Drive

Description
256 GB M2 SATA-3
256 GB M2 SATA-3 TLC
Before removing the speakers, follow these steps:
Before removing the Speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the solid-state drive:
96 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 61),
Optical drive connector on page
WLAN module on page
System board on page
85).
Base enclosure on page 65).
80).
89).
Spare part number
801473-001
801479-001