Memory Modules - HP Pavilion 17 Maintenance And Service Manual

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the speakers:
1. Turn the computer, with the front edge toward you.
2. Remove two screws (1).
3. Disengage the cables, and then remove the front speakers (2).
Reverse this procedure to install the speakers.

Memory modules

Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
various system problems. For steps on updating the BIOS, see
System Diagnostics on page
(UEFI) on page
Description
2 GB memory module for use with HP Pavilion 17 computer models
98 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
System board on page
Failure to update the computer to the latest BIOS prior to installing new memory may result in
110, see
107.
61),
Base enclosure on page
WLAN module on page 80).
89).
Windows – Using Setup Utility (BIOS) and HP PC Hardware Diagnostics
65).
Ubuntu Linux – Using Setup Utility (BIOS) and
Spare part number
691739-005