Permanent Display - Mercedes-Benz CLA Operator's Manual

Menus and submenus
208
Press the : or 9 button to select the
X
Speedometer [km/h] Speedometer [km/h]
[mph] [mph] function.
You will see the selected setting:
Press the a button to save the setting.
X
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X

Permanent Display

Permanent Display
You will see the selected setting
Temperature Temperature
Speedometer Speedometer [mph]
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
Canada only: daytime running lamps are
required by law. You cannot set the
Running Lights Running Lights
computer.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime Running Lights Daytime Running Lights
If the Daytime Running Lights Daytime Running Lights
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
Press the a button to save the setting.
X
Further information on daytime running
lamps ( page 109).
Y
or Speedometer Speedometer
on on
Sett Sett menu.
submenu.
function.
Outside Outside
or Speedometer [km/h] Speedometer [km/h]/
[mph].
Daytime Daytime
function via the on-board
Sett Sett menu.
function.
function
Setting the brightness of the ambient
lighting
Press the = or ; button on the steer-
X
or off. off
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Amb. Light +/- Amb. Light +/-
You will see the selected setting.
Change the setting with a.
X
Press the : or 9 button to adjust the
X
brightness to a level from
(bright).
Press the a or % button to save the
X
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
If you have activated the
ing ing function and the light switch is set to
Ã, the following functions are activated
when it is dark:
surround lighting: the exterior lighting
R
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
( page 109).
Y
exterior lighting delayed switch-off: the
R
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close
all the doors and the trunk lid, the exterior
lighting goes off after 15 seconds.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround Lighting Surround Lighting
When the
activated, the light cone and the area
Sett Sett menu.
function.
Off Off to
Surround Light‐ Surround Light‐
Sett Sett menu.
function.
Surround Lighting Surround Lighting
Level 5 Level 5
function is