Permanent Display - Mercedes-Benz GLE Hybrid 2019 Operator's Manual

Menus and submenus
44
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Hybrid Hybrid submenu.
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Maximum Charge Current: Maximum Charge Current:
You will see the selected setting.
Press the a button to save the setting.
X
The maximum charge current values in the on-
board computer may deviate from the charg-
ing cable values.
Further information on charging the high-volt-
age battery (plug-in hybrid vehicles)
( page 30).
Y
Setting the departure time
You can climatize the vehicle interior prior to
your departure with the "Set departure time"
function. Further information on pre-entry cli-
mate control ( page 18).
Y
If you recharge the high-voltage battery, the
function also displays the charging prediction.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Hybrid Hybrid submenu.
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Departure Time: Departure Time:
You will see the selected setting.
To set no departure time: press the : or
X
9 button to select
Press a to confirm.
X
If you recharge the high-voltage battery, the
multifunction display also shows the time
Sett. Sett. menu.
function.
Sett. Sett. menu.
function.
No No Preselection Preselection.
when the high-voltage battery will be fully
charged.
or
To set a departure time: press : or 9
X
A A , B B or C C to select the desired preset.
Press the a button to confirm the selec-
X
tion.
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
X
If you recharge the high-voltage battery, the
multifunction display shows the expected
condition of charge of the high-voltage bat-
tery for the departure time set.
Further information on charging the high-volt-
age battery (plug-in hybrid vehicles)
( page 30).
Y
Instrument cluster submenu
Selecting permanent display
The

Permanent Display:

Permanent Display:
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster Instrument Cluster
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Permanent Display: Permanent Display:
The current setting,
or Speedometer Speedometer [mph]: [mph]:, appears.
To change the setting: press a again.
X
function allows you
Settings Settings menu.
submenu.
function.
Outside Temperature Outside Temperature