Side windows
88
Convenience opening
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions simultane-
ously:
unlock the vehicle
R
open the side windows
R
open the panorama roof with power tilt/
R
sliding panel and the roller sunblinds
i
The convenience opening feature can
only be operated using the SmartKey. The
SmartKey must be close to the driver's
door handle.
Point the tip of the SmartKey at the driver's
X
door handle.
Press and hold the % button until the
X
side windows and the panorama sunroof
are in the desired position.
If the roller sunblinds of the panorama roof
with power tilt/sliding panel are closed, the
roller sunblinds are opened first.
Press and hold the % button again until
X
the panorama roof with power tilt/sliding
panel is in the desired position.
To interrupt convenience opening:
X
release the % button.
Convenience closing feature
G
WARNING
When the convenience closing feature is oper-
ating, parts of the body could become trapped
in the closing area of the side window and the
sliding sunroof. There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.
When you lock the vehicle, you can simulta-
neously:
close the side windows
R
close the panorama roof with power tilt/
R
sliding panel
On vehicles with a panorama roof with power
tilt/sliding panel, you can then close the
roller sunblinds.
i
The SmartKey must be close to the driv-
er's door handle.
Press and hold the & button until the
X
side windows and the panorama roof with
power tilt/sliding panel are fully closed.
Make sure that all the side windows and the
X
panorama roof with power tilt/sliding
panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
Press and hold the & button again until
X
the roller sunblinds of the panorama roof
with power tilt/sliding panel close.
To interrupt convenience closing:
X
release the & button.
Resetting the side windows
You must reset each side window if:
the side window opens again slightly after
R
being closed fully.
the side window can no longer be fully
R
opened or closed.
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed (
page 87).
Y
Hold the switch for an additional second.
X